Tire Tread Depth Chart
November 11, 2026
Tire Tread Depth: What the Numbers Mean and When to Replace in Michigan
Tread depth is measured in 32nds of an inch and tells you how much usable rubber is left on your tire. New tires typically start at 10/32 to 11/32. The legal minimum in Michigan is 2/32. But the legal minimum and the practical replacement point are not the same thing — especially if you are driving through a Lansing winter.
Quick Answer
- New tires: 10/32 to 11/32 inch tread depth
- 4/32: Wet weather performance drops significantly — start planning replacement
- 2/32: Legal minimum in Michigan — replace now
- Penny test checks for 2/32; quarter test checks for 4/32
- For Michigan winter driving, 4/32 is the practical safety threshold, not 2/32
Tread Depth Reference Guide
- 10/32 – 11/32: New tire. Full tread life available.
- 8/32 – 9/32: Good condition. Normal driving performance.
- 6/32: Acceptable. Begin monitoring more frequently.
- 4/32: Wet and winter traction is noticeably reduced. Plan replacement.
- 2/32: Legal minimum. Poor wet and snow traction. Replace immediately.
- 1/32 or less: Unsafe. Do not drive on these tires in wet conditions.
How Do You Check Tread Depth?
The Quarter Test (4/32 Check)
Insert a quarter into the tread groove with Washington’s head pointing down toward the tire. If you can see the top of his head, your tread is at 4/32 or less. For Michigan drivers, this is the point to start shopping for replacement tires — not a critical failure, but the time to act before winter.
The Penny Test (2/32 Check)
Insert a penny into the tread groove with Lincoln’s head pointing down. If you can see the top of Lincoln’s head, your tread is at 2/32 or less. This is the legal minimum in Michigan. Tires at this depth have poor wet and snow traction and should be replaced.
Wear Indicator Bars
Most tires have built-in tread wear indicators — small raised bars molded into the bottom of the tread grooves. When the tread around them wears down to the same level as these bars, the tire is at 2/32 and legally worn. They are typically visible as flat spots across one or more grooves.
Why 4/32 Matters More Than 2/32 for Michigan Drivers
The legal minimum of 2/32 was established as a minimum safety standard, not an optimal replacement point. Research on wet stopping distances shows a significant increase in stopping distance between 4/32 and 2/32 — particularly on wet or snowy pavement.
In Greater Lansing, where winter driving on snow and slush is routine from November through March, waiting until tires reach the legal minimum means driving with reduced traction during the most demanding season. Replacing at 4/32 gives you full winter capability for the season ahead.
What About Uneven Tread Depth?
Always check tread depth in multiple spots across the tire — center, inner edge, and outer edge. A tire that shows 6/32 in the center but 2/32 on the inner edge is effectively worn and will continue to wear unevenly. Uneven wear usually indicates an alignment or suspension issue that should be addressed before or alongside tire replacement.
Built on Trust, Driven by Standards
At Affordable Tires & Auto Repair, we measure tread depth on all four tires during every service visit and show you the numbers. If a tire is approaching the replacement threshold, we will let you know — and explain why, including any underlying cause like alignment wear. You make the call on timing; we give you the information to make it confidently.
FAQ
Can I use a gauge instead of the coin test?
Yes — an inexpensive tread depth gauge gives you a more precise reading. Most tire shops measure with gauges as part of a routine inspection.
My tires have 4/32 — do I need to replace them now?
Not necessarily right now, but you should plan for replacement soon, especially before winter. At 4/32, wet and snow performance is reduced. For Michigan conditions, we recommend replacing at or before 4/32 if winter is approaching.
One tire is more worn than the others — what does that mean?
Uneven wear across tires usually indicates a rotation that was skipped, or an alignment or suspension issue. We can inspect the wear pattern and tell you what is causing it.
Affordable Tires & Auto Repair — Lansing, MI
Bring your vehicle in and we will check all four tires and give you honest tread depth readings with clear recommendations. We serve drivers in Lansing, East Lansing, Okemos, Haslett, Holt, DeWitt, and across Mid-Michigan.









